Allison CL(B)T5000

Allison CL(B)T5000

Category:

Description

Ratings
Drop Box Models Net Input Torque lb-ft (N*M) Net Input Power hp (kW) Turbine Torque lb-ft (N*M) Vocations
  • CLT5860-5
  • CL(B)T5860-2
1350 (1822) 525 (391) 2620 (3537) Mobile Rigs – Workover, Pulling, Drilling, Pumping, Stimulation, Custom Applications
  • CLT5960-5
  • CL(B)T5960-2
1950 (2633) 550 (410) 3476 (4692) Mobile Rigs – Workover, Pulling, Drilling, Pumping, Stimulation, Custom Applications

ENGINE INTERFACE

  • Acceptable full-load engine governed speed: 1900-2500 rpm
  • Minimum engine idle speed range (with the transmission in Drive): 550rpm

MOUNTING

  • Direct: SAE No. 1 flywheel housing with flexplate drive. Cradle mount using engine flywheel
    housing mounting pads and transmission rear cover mounting pads (or dropbox side pads, if applicable) with 0.625-11 inch series bolts.
  • Remote: Side pads on transmission rear cover (or dropbox side pads, if applicable) plus front trunnion mount.

TORQUE CONVERTER

Model Stall Torque Ratio Kp-Factor* at Stall
TC-580 2.89 62.2 (53.4)
TC-680 (with retarder) 2.17 53.2 (45.7)
TC-680 (without retarder) 2.08 54.6 (46.9)
TC-682 1.77 43.7 (37.5)
TC-683 1.85 35.1 (30.1)

MECHANICAL RATIOS

Gear ratios do not include torque converter multiplication)

First 4.00 : 1
Second 2.68 : 1
Third 2.01 : 1
Fourth 1.35 : 1
Fifth 1.00 : 1
Sixth 0.67 : 1
Reverse 1 – 5.15 : 1
Reverse 2 – 3.44 : 1
In forward range 5.97
Dropbox, if applicable 1.00 : 1

CONTROL SYSTEM

Description
  • CL(B)T5860, CL(B)T5960, CL(B)T6061 Model – Automatic Electronic
  • CL(B)T5860, CL(B)T5960, CL(B)T6061 Model – Manual Electric
  • CL(B)T5860, CL(B)T5960, CL(B)T6061 Model – Manual Hydraulic
Shift Sequences [C = Converter Mode (lockup clutch disengaged); L = Lockup Mode (lockup clutch engaged)] 1C–1L–2C–2L–3C–3L–4C–4L–5C–5L–6C–6L
Driver-to-Transmission Interface Customer furnished, cab-mounted shift selector

PHYSICAL DESCRIPTION

Straight–Through Dropbox Model
Length (engine housing to  flange face)
  • Basic:
  • With retarder provision:
  • 54.3 in (1380 mm)
  • 57.8 in (1467 mm)
  • 57.5 in (1466 mm)
  • 61.1 in (1553 mm)
Width
  • Basic:
  • With retarder provision:
  • 25.9 in (658 mm)
  • 29.4 in (747 mm)
  • 25.9 in (658 mm)
  • 29.4 in (747 mm)
Depth (below horizontial center line) 17.0
in (432 mm)
26.7 in (678 mm)
Height (above horizontial centerline)
  • Basic:
  • With direct mount filters:
  • 13.7 in (348 mm)
  • 18.2 in (462 mm)
  • 13.7 in (348 mm)
  • 18.2 in (462 mm)
Dry weight
  • Basic:
  • Top engine-driven PTO drive gear:
  • Park Brake: (12” x 5”)
  • Remote Mount Provision:
  • Retarder Provision:
  • 2200 lb (998 kg)
  • 30 lb (14 kg)
  • 60 lb (27 kg)
  • 55 lb (25 kg)
  • 165 lb (75 kg)
  • 2750 lb (1247 kg)
  • 30 lb (14 kg)
  • 60 lb (27 kg)
  • 55 lb (25 kg)
  • 165 lb (75 kg)

SIDE ENGINE-DRIVEN POWER TAKE-OFF PROVISION

PTO drive Engine-driven spur gear
PTO mounting pad Eight-bolt, 4 o’clock position (as viewed from rear)
PTO drive gear ratio 1.00 x engine speed
PTO drive gear rating Intermittent: 200 hp (149 kW) and Continuous: 125 hp (93 kW)

LIGHT DUTY ACCESSORY DRIVE

Accessory drive Engine-driven, internal spline
Accessory drive mounting pad Location: 4 o’clock position (as viewed from rear of transmission)Orientation: Toward rear of transmission
Accessory drive ratio 1.00x engine speed
Accessory drive rating Torque: 25 lb-ft (24 N*m)Power: 10 hp (7.5 kW)

TOP ENGINE-DRIVEN POWER TAKE-OFF PROVISION (OPTION)

PTO drive Engine-driven spur gear
PTO mounting pad Eight-bolt, 12 o’clock position (as viewed from rear)
PTO drive gear ratio 1.21 x engine speed
PTO drive gear rating
  • Intermittent: 200 hp (149 kw)
  • Continuous: 125 hp (93 kw)

INPUT RETARDER PROVISION (OPTION)

Type Integral, hydraulic – Coupling-type rotor between fixed stators
Capacity at 2100 rpm
  • Torque: 1500 lb-ft (2034 N*m)
  • Power: 600 hp (447 kW)

OIL SYSTEM

Oil Type C-4
Capacity Excluding external circuits
  • Transmission: 18.0 Gallons (68 liters)
  • Dropbox: 13.0 Gallons (49 liters)
Main Circuit Oil Filter
  • Standard: Manifold for full-flow, remote mounted, replaceable element
  • Optional: Direct-mount full flow, replaceable elements (2)
Cooler circuit oil filter (optional) Replaceable element, remote-mounted

SPEEDOMETER PROVISIONS

Electronic: Location: LS-TTL signal, 39 pulses per output shaft revolution
Output signal from transmission ECU
Mechanical Drive (straight-thru model): Location: SAE “Heavy Duty” 5/32-inch; Ratio 0.50 : 1
Transmission rear cover
Mechanical Drive: Location: SAE “Heavy Duty” 5/32-inch; Ratio 1:00: 1
Rear surface of dropbox module

PARK BRAKE PROVISION

  • Type (customer supplied): 12 x 5-inch drum
  • Capacity at lever apply force: 90,000 lb-in at 517 lbf (10,168 N*m at 2058 N)